Clifford Omnisensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61820
Printed Date: July 13, 2025 at 2:34 AM

Topic: Clifford Omnisensor

Posted By: dcabinatan
Subject: Clifford Omnisensor
Date Posted: August 22, 2005 at 8:00 AM

I have an older Clifford Omnisensor ('94-'95) and would like to know how to wire it up to a 791XV and be able to adjust the sensitivity on it.

Replies:

Posted By: ringojam
Date Posted: August 22, 2005 at 5:01 PM

Omnisensors ar adjustable only with a clifford alarm get a directed 508d dual zone radar sensor

Posted By: its_radio_shop
Date Posted: August 23, 2005 at 11:21 PM

Dual zone radar sensor isnt a very good alternative for someone wanting to use an omnisensor. But as posted above, the omnisensor has to be wired to the Clifford alarm to work. If you do not have the Clifford alarm you should just look for a good quality dual stage shock sensor.

Print Page | Close Window