dei 530t with an aps 996a

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61834
Printed Date: July 13, 2025 at 6:23 PM

Topic: dei 530t with an aps 996a

Posted By: davecajon
Subject: dei 530t with an aps 996a
Date Posted: August 22, 2005 at 12:06 PM

Hi,

Ok I went and bought the 530t window mod. and it works fine. My problem now is the "gnd when armed" connection, the orange wire. As soon as I turn the ingition to the off position, the windows roll up, is this because I have the alarm set to "passive arming". The gnd when armed wire on the aps 996a is also orange. Thanks

Replies:

Posted By: mo12v
Date Posted: August 22, 2005 at 1:03 PM

If it is set to Passive.....yes it goes to Armed.......Orange wire will Ground
I didn't think Passive was that quick.........Usually there is a 30 or so second delay

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: davecajon
Date Posted: August 22, 2005 at 1:36 PM

I didnt think so either, but on the APS 996 it is, my other option is to attach it to a validity channel.

Posted By: davecajon
Date Posted: August 22, 2005 at 1:39 PM

Is there a way to increase the delay through programming or will I just have to set the system off passive.

Print Page | Close Window