1 point imobilizer to 2 point ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61857
Printed Date: May 14, 2025 at 7:42 PM

Topic: 1 point imobilizer to 2 point ?

Posted By: gerryb
Subject: 1 point imobilizer to 2 point ?
Date Posted: August 22, 2005 at 8:57 PM

I have an alarm with 1 only negative output to trigger an igntion cut relay when the alarm is turned on. Could I use a diode on this same negative output to hook up the same type of relay to cut my starter, (then making it a 2 point immobilizer} ??

Replies:

Posted By: iskidoo
Date Posted: August 25, 2005 at 9:05 AM

Yes just use a seperate relay for each connection break and that should work fine. you only need one diode on the output side. Connect the negative relay triggers together and attach to the diode.

-------------
Steve G

Posted By: gerryb
Date Posted: August 25, 2005 at 5:42 PM

Thanks Steve

Print Page | Close Window