Big Alarm problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61981
Printed Date: July 13, 2025 at 6:23 PM
Topic: Big Alarm problem
Posted By: JdM xplod b01
Subject: Big Alarm problem
Date Posted: August 24, 2005 at 4:16 PM
I got a road rage alarm from ebay, and nothing works when. The alarm turns, and when i taped the door triggers (+,-) into the dome light wires and open the door, the alarm wont go off. Also when i plug in the ignition trigger into the cigeratte lighter wire and turn the key, the alarm wont go off. Does anyone know what can be wrong??? My brother told me that all the wires have to be attached before i plug the harness into the brain, is this rite?
-------------
Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.
Replies:
Posted By: mo12v
Date Posted: August 24, 2005 at 4:20 PM
JdM xplod b01 wrote:
The alarm turns, and when i taped the door triggers (+,-) into the dome light wires and open the door, the alarm wont go off. Also when i plug in the ignition trigger into the cigeratte lighter wire and turn the key, the alarm wont go off.
Why would you " plug in the ignition trigger into the cigeratte lighter wire "??
That would Disable your Alarm................
You probably need to READ your Installation Instructions CAREFULLY and get a TECH sheet on your car FIRST..........
Mark the wires you will need on the Tech Sheet or Unit .........
Ask questions ................
Then Install ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: JdM xplod b01
Date Posted: August 24, 2005 at 4:31 PM
cuz the cigerrette lighter turns on when they key is on the 1 position, and thats what the ignition trigger is for, it sets off the alarm when som1 tries to turn on/ start the car. If i look stupid doin it, i dont kno n e other place to put it.
-------------
Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.
Posted By: mo12v
Date Posted: August 24, 2005 at 4:40 PM
Is this a RRAL-400? Install into 1996 Altima? ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: chungo
Date Posted: August 24, 2005 at 4:43 PM
try connecting every thing and then test the system, it might be in valet mode.
Posted By: JdM xplod b01
Date Posted: August 24, 2005 at 4:52 PM
Yea it is the rral-400 into a 96 altima.
-------------
Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.
Posted By: mo12v
Date Posted: August 24, 2005 at 4:56 PM
RED = White at Ignition Switch
BLACK = GROUND
YELLOW = Black / Red at Ignition Switch
WHITE = Red / Blue at Light Switch
BROWN = Siren
GREEN = Red / White at Driver Kick Panel
BLUE = Gray / Red UNLOCK at Door Lock Control Unit Behind Driver Dash ( small set of wires )
GREEN = Gray / Blue LOCK at Door Lock Control Unit Behind Driver Dash ( small set of wires ) Hook up these wires and ( if you haven't fried it ) it should work.
The rest of the AL-400 wires can be hooked up later ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: JdM xplod b01
Date Posted: August 24, 2005 at 5:12 PM
so the red wire doesnt go directly to the battery?
-------------
Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.
Posted By: mo12v
Date Posted: August 24, 2005 at 6:14 PM
It can if you want............
OR
White at Ignition Switch is Constant also
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: JdM xplod b01
Date Posted: August 25, 2005 at 11:01 PM
Thnx yall, i got it to work doin what u said.
-------------
Pioneer Premier TS-w3004spl, Bass Slammer vented, Kenwood KDC MP-4028, and a KAC-9152d.
|