adding actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61988
Printed Date: July 17, 2025 at 9:18 PM

Topic: adding actuators

Posted By: rabbit713
Subject: adding actuators
Date Posted: August 24, 2005 at 8:06 PM

is this wiring diagram correct? cause i tried it and it only unlocked. (i think pins 86 go together instead of 86 to 85.)

-------------
Rabbit713

Replies:

Posted By: auex
Date Posted: August 24, 2005 at 8:14 PM

I don't know? There is no diagram or link,

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: rabbit713
Date Posted: August 24, 2005 at 8:19 PM

oh my bad i forgot to do that...........well here it is

https://the12volt.com/doorlocks/page3.asp#arp

-------------
Rabbit713

Posted By: auex
Date Posted: August 24, 2005 at 8:23 PM

Yes this diagram is correct.
posted_image

Pins 85 and 86 are not polar in most cases and it doesn't matter what goes where but that diagram is correct. I would check the wires and make sure you have +12V going to pin 87 of the lock relay and the alarm is sending out the pulse to the lock relay.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: rabbit713
Date Posted: August 24, 2005 at 8:27 PM

oh thanks....maybe its because i was testing this on a bench multimeter and power supply. but the unlock output was working) does this type of testing matter

-------------
Rabbit713

Print Page | Close Window