2000 Dodge Neon alarm problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62021
Printed Date: May 19, 2024 at 3:51 AM
Topic: 2000 Dodge Neon alarm problem
Posted By: jose031
Subject: 2000 Dodge Neon alarm problem
Date Posted: August 25, 2005 at 11:17 AM
I have an after market alarm (black widow) now the factory alarm won't let me start my car, how can I disable the factory alarm? please help. I want to go to work, and I need my only car to be working. can anybody gives me an idea please reply back or e-mail jose031@aol.com thanks in advance for does of you that are willing reply back. ------------- plz help other, because is reallly nice when you get help...remember!!..what goes around come's around.
Replies:
Posted By: Autoobsession
Date Posted: August 25, 2005 at 11:20 AM
Is there a remote start in the car also? If not make sure the starter kill from the alarm is disconnected. Make sure the starter wire is connected back to factory. -------------
Posted By: jose031
Date Posted: August 25, 2005 at 11:43 AM
thank you for you quick reply, I do have remote start on my car, but everything was working and out of no where my factory alarm just kept going off, Im trying to do what you told to do, but ther is a lot of wire and I live in Jacksonville Florida and I can't even take my car to a shop, so please help out and if you have another Idea please reply back again, thanks to you and anybody the is willing to help me out..
-------------
plz help other, because is reallly nice when you get help...remember!!..what goes around come's around.
Posted By: iskidoo
Date Posted: August 25, 2005 at 12:20 PM
Take the shroud off below the steering column and look for a heavier guage YELLOW wire. Somewhere along that wire it should have been cut and attached to a relay of some sort. Basically, you want to connect the 2 cut ends of that yellow wire. This will allow you to start the car with the key until you get the alarm module fixed. If you see the relay in a socket you can remove it and jumper across the 2 terminals in the socket that lead back to either end of the yellow cut wire.
-------------
Steve G
Posted By: jose031
Date Posted: August 25, 2005 at 1:48 PM
thanks for the reply guys im still trying everything you guys told to do, and I found both Yellow wire, but sitll doesn't work, I beleave is that the factory alarm is armed, and I want to know how to disable the factory alarm.
Posted By: iskidoo
Date Posted: August 25, 2005 at 2:31 PM
Factory Alarm Disarm - disarms with unlock
-------------
Steve G
Posted By: jose031
Date Posted: August 25, 2005 at 3:20 PM
it doesnt disarm with the remote control, I think my factory remote only open and close the door. any; other ideas, please help I can not go to work tomorrow either if I don't fix my car today, please guys helppp meeeeeeeee, and thanks in advance for your future replay...
Posted By: mo12v
Date Posted: August 25, 2005 at 4:29 PM
If you have Remote Start ............There should be an Extra Key ( usually in a small box ) somewhere near the Steering Column or Remote Start box. Your Ignition Key that you are using may have become UNcoded and U might try the one that is in your Remote Start
OR
hook a 7.5 Ohm Resistor to the Light Green wire in Driver Kick Panel & ground it.
| OEM Alarm Disarm | LIGHT GREEN (-) | 7.5K Ohm Resistor Will Disarm Only |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: jose031
Date Posted: August 25, 2005 at 6:32 PM
thank you for the info mo12v, I already tryed the key that I have in the litle box for the remote start alarm, and still doesn't work, I haven't try the 7.5 resistor to the light green wire, can you explaying a litle better house can I do that? remember I am not really an expert on this things is really that I can't take it to the dealer, the dealer here in jacksonville Florida are crazy when it comes to charge, and they want me to take the car other there and just to touch the car they want $100 up front, and that's one of the reason why I really apreaciate it everything you guys trying to do for me. there is no stupid statement guys, please help me out.................any Idea please let me know how to do it.. ------------- plz help other, because is reallly nice when you get help...remember!!..what goes around come's around.
Posted By: jose031
Date Posted: August 25, 2005 at 6:55 PM
If I unplug the main car computer would that work? and if it would work where would the main computer be ? pleazz zzz helppppppp!
Posted By: jose031
Date Posted: August 25, 2005 at 7:48 PM
I went to RadioShack and I got the 10 Ohn resister, They didn't have the one for 7.5 Ohn, I tryed but it didn't work, can I have some other Ideas please...... what else can I try???????
Posted By: mo12v
Date Posted: August 25, 2005 at 8:14 PM
10 Ohm won't work.......has to be within 10% ........
If you have Radio Shack.....Ask them if they know an Installer or a Shop that can help you.....Maybe even radio Shack
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: jose031
Date Posted: August 25, 2005 at 8:29 PM
wow, I don't really understand the 7.5 Ohm thing, can you tell me what other things do I have to do? do I have to have an extra wire from the (negative of the batery ) to the resister and from the resister to light green wire? do I have to cut the green wire? and last question from what end do I have to connect the resiste or it doesn't matter?
|