The Nissan folks via the VIN number say it has Keyless Entry. I bought a remote on Ebay then tried to program it. But no matter how many times I insert the key in and out....lock the doors etc. I cannot get it to enter the programming mode. Where is the entry module located, does anyone have a diagram, how do you check relays. Where to I start? I don't want to pay the dealer $100 to fix it. Well, really I want to fix it myself just because I'm ticked off that I hadn't been able to figure it out yet. Know what I mean.....
This is what I have:
RKE Module | "SMART ENTRY CONTROL UNIT" LOCATED BEHIND DRIVER DASH | |
Motor Lock | RED / BLUE | AT "SMART ENTRY CONTROL UNIT" |
Motor Unlock | WHITE/ RED | AT "SMART ENTRY CONTROL UNIT" |
Drv Door Unlock | YELLOW | AT "SMART ENTRY CONTROL UNIT" |
OEM Relays | BUILT INTO "SMART ENTRY CONTOL UNIT" |
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
MO...thanks for that reply. I will check that module out when my daughter brings the car over tommorow from her first week of college at LSU. I know there are two relays that are designated as keyless 1 and keyless 2 in the two different fuse boxes under the hood. Can I check those myself or do I need to bring to a place like Autozone? Thanks again.
roth
U might want to see if any Electronics shop has a Remote Frequency Checker...............We use one, ........It checks the Remote, Factory & Aftermarket, to see if the Remote is sending a signal. It also shows the Frequency...........Works on all RF type remotes, but NOT Infra-red
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.