Cobalt Alarm?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62183
Printed Date: April 28, 2024 at 6:50 PM
Topic: Cobalt Alarm?
Posted By: carguy411
Subject: Cobalt Alarm?
Date Posted: August 28, 2005 at 9:44 AM
ok i see in the wire codes that he factory alarm can only be armed and sisared with factory remote , so inorder to avoid using 2 remotes for a new alarm does that mean you can just disarm the factory alarm and then put the keyfob away and it wont rearm itsself with the new installed alam system , i dont want any false triggering of the new or factory alarm.. please let me knowo how you guys deal with this
thanks for the help
Replies:
Posted By: extreme1
Date Posted: August 28, 2005 at 10:27 AM
you then set the car, through the Driver INfo Center, to RKE only, this way there's no chance of the factory arming.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: carguy411
Date Posted: September 04, 2005 at 1:59 PM
i looked but i dont see an option for that it just give gas milleage ,temp and thing like that unless i looked at it wrong.. do all the model of the cobal have this option??
thanks
Posted By: carguy411
Date Posted: September 04, 2005 at 2:02 PM
i looked but i dont see an option for that it just give gas milleage ,temp and thing like that unless i looked at it wrong.. do all the model of the cobal have this option??
thanks
Posted By: carguy411
Date Posted: September 04, 2005 at 2:06 PM
i looked but i dont see an option for that it just give gas milleage ,temp and thing like that unless i looked at it wrong.. do all the model of the cobal have this option??
thanks
Posted By: auex
Date Posted: September 04, 2005 at 2:28 PM
Are you having problems or are you worrying about possible situations? Have you installed the alarm yet? If it is arm through remote only then it will never turn on and there will be no problem.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: carguy411
Date Posted: September 05, 2005 at 9:49 AM
no im going to install one and i just want to figure out all the details now then later, i always like to plan out my installs all the way throught before i do them so i know what to expect and what problems i might run into.. so aslong as the factory remote doesnt arm the system ill be fine then it wont ever go off right????
thanks
oh sorry for the multilpe post before it wouldnt load the next page and i didnt know it kept posting..
Posted By: carguy411
Date Posted: September 08, 2005 at 3:00 PM
im prob going to do this tommorrow so am i on the right track
i wont have any problems
thanks
|