2 window up and down module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62211
Printed Date: May 15, 2024 at 1:54 PM
Topic: 2 window up and down module
Posted By: HICKMANAE3
Subject: 2 window up and down module
Date Posted: September 05, 2005 at 2:29 AM
I have just install a 2 window up and down module and after connecting all the wires propperly and pressing the button on the remote. The window moves up or down only an inch. The input is a 12volt constant from the battery and the output onto the motor is 8.53 volts. I'll also tested the window motor wire singlely and it has a constant output of 13.85 volts. I'll also tried hooking an relay up to the window module in order to send more power onto the motor wire but that doenst helps either. My next guess will to check the aux output from the alarm module that feeds into the window module. and test to find out what voltage is coming out. So can anyway help me out
-------------
No security system can beat the tow truck :(
Replies:
Posted By: Velocity Motors
Date Posted: September 05, 2005 at 8:16 AM
The module is either sensing a voltage spike from the window motor causing it to stop ( like it's suppose to ) or the output on the remote control unit is only outputting a pulsed signal. You have to set it for constant or latched output in order for the modules to operate properly.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: HICKMANAE3
Date Posted: September 05, 2005 at 12:09 PM
ok , ill program the alarm right away to a timed out
-------------
No security system can beat the tow truck :(
|