Dodge Dakota
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6226
Printed Date: May 29, 2024 at 3:23 AM
Topic: Dodge Dakota
Posted By: mark2003
Subject: Dodge Dakota
Date Posted: December 04, 2002 at 2:16 PM
Does anyone know the procedure to program a spare key for a 2002 Dakota
Replies:
Posted By: tech_advice
Date Posted: December 04, 2002 at 3:14 PM
You have to take it to the dealer, there is no way to program a spare key without the handheld they have, make sure you take every key you have for that vehicle with you, because they don't just program the new key, they reprogram them all to match......there usually isn't a charge if you take it to the dealer where the vehicle was purchased... ------------- Don't share too many install secrets with your customers, pretty soon they won't need you!!!!!
Posted By: PLAYER69
Date Posted: December 04, 2002 at 3:35 PM
Turn key 1(original key) on for 3-15 seconds. Within 15 seconds of removing key 1, put key 2 (2nd original key) in and turn on for 10-15 seconds until indicator light flashes and chime sounds. Put NEW key in and turn on (indicator light will stay on solid for 3 seconds and the turn off to indicate new key has been programmed) Your done!
Posted By: tech_advice
Date Posted: December 04, 2002 at 3:53 PM
Player69, just wondering if you have ever tried this, and did it work, i tried it once, didn't work, called the dealer and they had to use a handheld to upload through the test plug through the ignition, I've done Fords and Mazdas like you said, but never a Chrysler....
-------------
Don't share too many install secrets with your customers, pretty soon they won't need you!!!!!
Posted By: securinu
Date Posted: December 04, 2002 at 7:39 PM
i do this all the time in chryslers . Quick Steps: A. Purchase a blank key and have it cut
B. Insert original key #1 into ignition and turn to On
C. Wait 5 seconds and turn key to off
D. Immediately insert original key # 2 into ignition and turn to on
E. Wait 10 seconds for SKIS indicator in dash starts to flash
F. Turn ignition off, insert new blank key and turn ignition back on
G. Once SKIS light stops flashing and turns off, your new key is programmed
Posted By: mark2003
Date Posted: December 04, 2002 at 8:10 PM
Thanks Guys that worked
Posted By: securinu
Date Posted: December 04, 2002 at 9:35 PM
glad to help
|