how to hooking up two acc/ blower wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6228
Printed Date: November 21, 2025 at 3:10 AM

Topic: how to hooking up two acc/ blower wires

Posted By: dattardo
Subject: how to hooking up two acc/ blower wires
Date Posted: December 04, 2002 at 2:42 PM

hey everyone- i am installing a remote starter on a 97 ford taurus. the vehicle has two acc/blower wires. i am supposed to connect both acc. wires to one wire from my remote starter. this is obviously going to sound like a stupid question, but which way is best when attaching one R/S wire to two vehicle (e.g. acc. ) wires without shorting the heater blower?

thank you, much obliged

tom

-------------
tom

Replies:

Posted By: tech_advice
Date Posted: December 04, 2002 at 3:11 PM

You'll have to use a relay , pin 30(12volt constant), pin 85(neg. when running output from remote start), pin 86(first ignition), pin 87(2nd acc, ign, etc...), hope this helps....

-------------
Don't share too many install secrets with your customers, pretty soon they won't need you!!!!!

Print Page | Close Window