Keyless entry, ’89 Daytona
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62433
Printed Date: May 11, 2025 at 10:39 PM
Topic: Keyless entry, ’89 Daytona
Posted By: glhchar
Subject: Keyless entry, ’89 Daytona
Date Posted: September 09, 2005 at 11:05 AM
OK i have been trying to hook up my keyless entry for 2 days now and all i can get to happen is either the passenger locks or the drivers door unlocks. And the way i have it hooked up the power lock switch on the drivers door does nothing.
This is the wiring diagram i used
And i hooked them into the ORG/VT and PK/VT wires in the passenger side kick panel of my car(being sure to cut the wire not just splice into it).
I think everything should be correct but it clearly isnt.
Can anyone help me?
--Char
This is the wiring diagram i used
And i hooked them into the ORG/VT and PK/VT wires in the passenger side kick panel of my car(being sure to cut the wire not just splice into it).
I think everything should be correct but it clearly isnt.
Can anyone help me?
--Char
Replies:
Posted By: saleengt
Date Posted: September 09, 2005 at 4:59 PM