stand alone starter kill? 93 integra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62510
Printed Date: July 14, 2025 at 2:12 PM

Topic: stand alone starter kill? 93 integra

Posted By: roccosland
Subject: stand alone starter kill? 93 integra
Date Posted: September 10, 2005 at 11:32 PM

Is there a way to wire a stand alone starter kill switch without an alarm? I would be using a toggle switch. I found the diagram for the passive starter kill switch that uses 2 relays and I wired myself an assembly. Do I need diodes in the setup?

Replies:

Posted By: gcorrea
Date Posted: September 11, 2005 at 1:40 AM

check to the left under starter interrupts, this might help.

-------------
gcorrea

Posted By: footbaldd
Date Posted: September 11, 2005 at 2:28 AM

i have a 90gs, and i just put in a stand alone kill switch. i made a latching relay similar to the one in the diagram on this site to break 12+ going to the fuel pump from the relay. you could wire it off any momentary switch, and using key on power have it break continuity whenever the car is turned off. if you need a better explaination or assistance just let me know, but i found the articles on here to have just about everything i needed.

Posted By: Powermyster
Date Posted: September 12, 2005 at 3:47 AM

just need a switch and one 30A spdt relay

-------------
Why oh Why didn't i take the blue pill
Darren Power

Print Page | Close Window