Print Page | Close Window

Starter disable on Ranger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62550
Printed Date: May 19, 2024 at 3:52 PM


Topic: Starter disable on Ranger

Posted By: jumargibbs
Subject: Starter disable on Ranger
Date Posted: September 11, 2005 at 10:31 PM

My alarm module has an onboard relay for the starter disable. The instructions state to cut the starter wire (RED / lt. blue- '88 Ford Ranger) to add this relay to the circuit. However, there are two RED / light blue wires at the ignition switch. Does it matter which one I cut? Are they both part of the same circuit?

Thanks in advance.



-------------
Ken



Replies:

Posted By: mo12v
Date Posted: September 11, 2005 at 10:39 PM
Double check that other wire..............
Also, use a Meter to check your Starter wire before you cut.......

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window