Print Page | Close Window

Dome light illumination (optional)

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62560
Printed Date: May 19, 2024 at 12:14 PM


Topic: Dome light illumination (optional)

Posted By: jumargibbs
Subject: Dome light illumination (optional)
Date Posted: September 12, 2005 at 12:06 AM

The instructions for my Crimestopper said very little about the optional dome light wire. It provides 30 seconds of (-) upon disarm and the schematic shows it connected to 86 on a relay, but that's it. No complete circuit is shown. The door switches are (+).   Can I run the hot wire from the NO and solder it to the same spot I have the alarm door trigger (+) wire attached?

Thanks.



-------------
Ken



Replies:

Posted By: Powermyster
Date Posted: September 12, 2005 at 3:45 AM

here is how its wired

86  -  neg alarm output

85  -   constant 12V+

30  -   constant 12V+

87  -   door trigger( if door trigger is indded positive)

hope this helps



-------------
Why oh Why didn't i take the blue pill
Darren Power




Print Page | Close Window