Sunroof closure?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62568
Printed Date: July 18, 2025 at 10:41 PM

Topic: Sunroof closure?

Posted By: xjr41
Subject: Sunroof closure?
Date Posted: September 12, 2005 at 9:23 AM

Hi,

Can anyone help?

I have a 1991 Nissan 200SX turbo (240SX in the US) with an aftermarket electric sunroof. The sunroof is wired to constant 12v.

The car has a Clifford Concept 300 with SmartWindows4 and Intellistart.

How can I connect the sunroof to the window closure so they all shut together?

Do I need to utilise a window closure module (DEI529T or similar) or is there a relay driven solution I could use?

Any info would be great.

Thanks,

Steve.

Replies:

Posted By: xjr41
Date Posted: September 12, 2005 at 9:33 AM

Just seen the DEI530T.

Am I right in understanding that this could shut the sunroof and also vent the sunroof in co-ordination with venting the windows via the SmartWindows4? How would I wire it up with the SmartWIndows? Could I just tap into the command wires on the SmartWIndows?

Thanks.

Posted By: ringojam
Date Posted: September 13, 2005 at 3:22 PM

Use a channel on the clifford with a timed curcuit and a relay and do it for closed only .

Posted By: xjr41
Date Posted: September 13, 2005 at 3:44 PM

I thought about that but both timed outputs are being used. I have one negative when armed out put and was gonna use this with the 529T. Is this ok?

Print Page | Close Window