Print Page | Close Window

wiring lights to alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62581
Printed Date: July 18, 2025 at 9:52 PM


Topic: wiring lights to alarm

Posted By: pbaronmk1cab
Subject: wiring lights to alarm
Date Posted: September 12, 2005 at 12:55 PM

Can anyone help me with where to wire the output from the alarm to my lights ?? I want the indicators to flash on arm etc.

Also can some clever bod confirm the colour of the wire that i put the starter kill relay into. I know one side goes to the ignition side and one to the starter side of the wire but just want the wire confirming i think its the RED / black one.

Car is a mk1 golf cab 1985

cheers




Replies:

Posted By: genehewett
Date Posted: September 14, 2005 at 6:55 PM

The starter wire is RED / blk. As for the park lights there is 2 of them one for the left and one for the right. You have to use booth of them by diode isolating them. Do Not Connect Them Togather! If you need help with this reply to this post and i will post diagram.

Starter RED / black   +  ignition harness
Parking Lights+ gry/blk and gry/red    light switch



Posted By: Powermyster
Date Posted: September 16, 2005 at 11:14 AM

it takes about 30 seconds to test and find this wire.

test before all connections



-------------
Why oh Why didn't i take the blue pill
Darren Power




Print Page | Close Window