Hey guys,
I've been installing a Prestige Remote Start Security system on my 94 Camry. My buddy and I had some problems the other day and he posted and it works almost flawlessly now. Thanks for the help on that guys. However, now I've run into a new problem and I'm not sure if anyone can help.
My problem is: All the wiring diagrams i've found (including the one on here) online are wrong (at least for my car...94 Toyota Camry V6XLE) for three wires...the parking light feed and output, and the horn. The feed wire for the lights on the diagrams turned out to be my horn wire...so when my system was trying to flash the lights, it ended up beeping the horn. It was easy to figure out what my horn was but I'm at a loss for my parking lights. If anybody has any ideas or knows what the true wires are, I would really appreciate the help.
Thanks a lot guys.
Matt
I alway test every wire even if I have done the same car a million times over. Why don't you Test all the wires first, just in case the information is not correct. Remember to use the information as reference only.
Parking Lights + green bottom of fuse box
Notes: In a white connector just below the fuses with the wires exiting out toward you.
-------------
Be careful whose advice you buy, but be patient with those who supply it.

I have tested a bunch of wires but still cant figure it out...the green wire at the bottom of the fuse box in the white plug is not the right wire for the feed. Also the green wire on the steering column that is supposed to be the parking light (-) is the horn...
Thanks for the help though fellas...if you have any other ideas let me know...
Matt
Matt, I think you may just have over look. The Parking wire is there. The white plug you should search for is right next to the hood release below the fuse box. Look there first. If you are still not finding it. Open up the driver side kick panel. The green parking light wire is also there.
-------------
Be careful whose advice you buy, but be patient with those who supply it.

Look for a green and white(+) in the drivers kick. Its "deep" in the kick, down close to the floor almost. Theres black tape around the harness the wire is in. Its surrounded by 2 or3 harnesses that are covered with foam.
-------------
Thanks guys...I'll give the drivers kick a try. I know I must be overlooking it but I swear ive tried everything in that fuse box plug...
Thanks again guys...I'll let you know how it turns out
Matt