question on a 791
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62649
Printed Date: May 04, 2024 at 7:26 AM
Topic: question on a 791
Posted By: Strizzy23
Subject: question on a 791
Date Posted: September 13, 2005 at 5:28 PM
i just got done installing the remote start alarm. my issue is when i remote start it the lights flash until i put the key in is that suppose to do that ? Thanks Dave
Replies:
Posted By: Steve23
Date Posted: September 13, 2005 at 5:36 PM
Yes, it comes programmed to do that. You can change it in programming mode so they stay on.
Posted By: Strizzy23
Date Posted: September 13, 2005 at 5:44 PM
thanks i thought i mess something up. i have one more issue with the shock sensor i hit the windsheild and it wont warn is this because i dont have door pins?
Posted By: Steve23
Date Posted: September 13, 2005 at 5:50 PM
Does it warn away if you hit another part of your car? Where did you mount the sensor? Is it tightly secured?
Posted By: Strizzy23
Date Posted: September 13, 2005 at 5:54 PM
I strap it to the harness under the colum its set how it came from the factory
Posted By: Steve23
Date Posted: September 13, 2005 at 6:09 PM
Im no pro here but I thought they had to be attached to a solid surface on the car somewhere. For instance I stuck mine to the under side of my dash, a nice solid spot, with some double sided 3m tape and it works as it should.
Posted By: Strizzy23
Date Posted: September 13, 2005 at 6:23 PM
the chevy trucks are know to have bad door pins i got new ones on order should be here tomorow i hope thanks for the fast help
Posted By: blazeronspokes
Date Posted: September 15, 2005 at 1:06 PM
the reason it doesn't warn is because the loop end of the harness isn't facing the right direction.
Posted By: tom small
Date Posted: September 20, 2005 at 8:52 PM
Also, shock sensor does not work during remote start...
Posted By: Strizzy23
Date Posted: September 24, 2005 at 7:19 PM
I have another question when I disarm it I get the door open icon but the door wasn’t tamper with at all do you think maybe I have a bad doorjamb switch? Until I get the issue fix is there a way I can bypass it? I just don’t want the alarm to go off. Dave
Posted By: Strizzy23
Date Posted: September 24, 2005 at 9:38 PM
i figra it out thanks anyways you can delete this post
|