remote start starter wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62664
Printed Date: May 05, 2024 at 12:56 AM

Topic: remote start starter wires

Posted By: ty
Subject: remote start starter wires
Date Posted: September 14, 2005 at 3:03 AM

just a quick question, so when installing the 791xv remote start, the key side wire would be connected to my starter wire from ignition to fuse box right? And starter side wire would be connected to the starter wire coming from fuse box and going to starter right? Thanks.

Replies:

Posted By: mo12v
Date Posted: September 14, 2005 at 8:06 AM

Yes...............For the PURPLE & GREEN Wires

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: iskidoo
Date Posted: September 14, 2005 at 10:10 AM

The way your wording it worries me. Don't just connect one wire to one side of the fuse box and the other wire to the opposite side. Pick a spot on the starter wire and just cut it in 2.

-------------
Steve G

Posted By: ty
Date Posted: September 14, 2005 at 3:35 PM

alright so just make sure I put the green wire before the purple wire on the starter wire?

Posted By: mo12v
Date Posted: September 14, 2005 at 3:43 PM

Usually U would cut the Starter Wire in half at a location like the Ignition switch Harness.
Ignition Switch side of cut wire goes to GREEN wire
Starter side of cut wire goes to PURPLE wire
The 791xv keeps the car from starting with the Ignition Switch when Alrm is Armed

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: ty
Date Posted: September 14, 2005 at 4:22 PM

that was the info I was looking for exactly, thanks mo12v, sorry it just kind of confused me what with 2 wires going to one and all. Thanks all.

Posted By: simpsongary
Date Posted: September 16, 2005 at 12:10 PM

I have an Artic Start (RT2WAS) I need the user guid. Thanks Gary

-------------
Thanks

Gary

Print Page | Close Window