lock actuators
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62748
Printed Date: June 18, 2024 at 2:15 PM
Topic: lock actuators
Posted By: shortdogchap
Subject: lock actuators
Date Posted: September 16, 2005 at 11:18 AM
i am going to install 4 lock actuators on my manual locks on my 2005 chevy aveo 4 door...my alarm is a crimestopper cs2016fm ..my question is how many relays are needed....just one lock relay and one unlock relay for a total of two relays....or do i need a set of two relays per door.....i have looked at this sites diagram for adding actuators....but there is only two outputs after the relays are wired..two leads that go to the green and blue wires on the actuator....does that mean i just wire all four actuators to the same two leads....any feedback would help thx
-------------
steve
Replies:
Posted By: CutDog504
Date Posted: September 16, 2005 at 11:59 AM
yes, tie in all 4 actuators to the two outputs. But for 4 actuators, be sure you use at least a 25 amp fuse on your power wire feeding the relays.
Posted By: shortdogchap
Date Posted: September 16, 2005 at 12:39 PM
ok i thx cutdog
-------------
steve
|