Avital alarm problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62821
Printed Date: September 13, 2025 at 7:32 AM

Topic: Avital alarm problem

Posted By: scbird
Subject: Avital alarm problem
Date Posted: September 17, 2005 at 8:40 PM

I installed a model 4300 in a 98 ford E150 and for the life of me can`t get the power locks to work. I had a old audiovox sytem in it before in which I had to cut the red and the brown wire. The new sytem has a 200ma reversing 12 volt output. Do I just reconnect the red and brown and hook the 2 wires from the alarm to it? I tried it both ways and nothing. do I need a relay? It did say on the box that additional components may be needed for door locks. I used to install these things many moons ago and im a little out of touch with these new systems. Thanks in advance for any help. Mark

Replies:

Posted By: mo12v
Date Posted: September 17, 2005 at 8:50 PM

Could you old Audiovox have built in Relays??
If the vehicle did NOT have Factory Keyless, you will need 2 SPDT Relays

Power Lock	RED	8 PIN GRAY CONNECTOR
Power Unlock	BROWN	IN DRIVER KICK PANEL

Without OEM Keyless Entry Door Locks MUST BE TESTED FROM PASSENGER SWITCH!!
Without OEM Keyless.... Reversal Rest At Ground Door Locks .
With OEM Keyless ....Positive Pulse Door Locks

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: scbird
Date Posted: September 17, 2005 at 10:02 PM

It did have atleast 1 relay but its hard to tell what that circuit looks like. I did a seach but I think I still need the module from Directed with the relays to solve the problem. My van did not have the keyless entry so its off to the store to get what I need. Thank you so much for the quick responce. This truly is a great site, Thanks

Posted By: blazeronspokes
Date Posted: September 18, 2005 at 2:34 PM

use the 451m doorlock module.

Print Page | Close Window