Print Page | Close Window

98 Explorer remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62861
Printed Date: July 04, 2025 at 1:25 PM


Topic: 98 Explorer remote start

Posted By: NELSENKR
Subject: 98 Explorer remote start
Date Posted: September 18, 2005 at 6:10 PM

I have a 98 explorer,I am instelling a autopage 750 with remote start, The alarm works fine and the truck will start  and run. Which wire do i use to get A/C to work? I have 2 gray / YELLOW do I need both to start and run?

Thanks for all the help.............




Replies:

Posted By: mo12v
Date Posted: September 18, 2005 at 6:41 PM

Ignition #2GRAY / YELLOWIGNITION SWITCH HARNESS **
Ignition #3N/A
AccessoryBLACK/ L GREENIGNITION SWITCH HARNESS

** There Are Two GRAY / YELLOW Wires Located In The Ignition Switch Harness. Only One Needs To Be Powered For Remote Start Applications, The Correct Circuit Will Power The Heat/Ac.


-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: NELSENKR
Date Posted: September 18, 2005 at 7:11 PM

Tried both wires, no good, starts good with one or the other but no fan.




Posted By: NELSENKR
Date Posted: September 18, 2005 at 7:56 PM

Thank a lot had a bad conection on one of the gray / YELLOW wires..

Kevin


Print Page | Close Window