98 intrepid es intelliguard door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62888
Printed Date: July 07, 2025 at 11:10 AM

Topic: 98 intrepid es intelliguard door locks

Posted By: mrcllusb
Subject: 98 intrepid es intelliguard door locks
Date Posted: September 19, 2005 at 2:57 AM

I have a 98 dodge intrepid.On the clifford intelliguard 6000,pin 13 gray/green is the lock output and pin 14 gray/orange is the unlock output.Do it tap into the relays that are in the fuseblock,or since clifford make there door lock system to work with either polarity,and can grab the lock/unlock wires fom anywhere?

-------------
"ole blake"

Replies:

Posted By: mo12v
Date Posted: September 19, 2005 at 8:19 AM

I have been known to tap into Factory Relays on Dodge products.............
Sometimes it is easier. On some, U can even get Driver Priority if it has 3 Relays. 1 for Driver Door, 1 for Unlock other Doors, & 1 for Lock all Doors.
Just make sure you get the correct Negative PIN.
OR:

Power Lock	WHITE/ D GREEN	22 PIN CONNECTOR IN
Power Unlock	SINGLE WIRE SYSTEM	DRIVER KICK PANEL **

** WHITE/ D GREEN Door Lock Wire Must Receive A 12V (+) Pulse Thru A 2.7K Ohm Resistor To Lock And A 12V (+) Pulse Thru A 620 Ohm Resistor To Unlock.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: mrcllusb
Date Posted: September 19, 2005 at 8:48 AM

So even with the way the clifford system is designed for door locks,i still need to add the resisitors inline?

-------------
"ole blake"

Posted By: mo12v
Date Posted: September 19, 2005 at 9:03 AM

Not if you go to the Relays..............If there is independent removable Relays. Needs only Negative pulse
OTHERWISE if U do Single Wire hook-up, U will need Resistors

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: mrcllusb
Date Posted: September 19, 2005 at 9:17 AM

Yeah i think going to the relays will be easier since they are already there..Now do you just spice into the rear of the relays,and what wire do you splice into??

-------------
"ole blake"

Posted By: mo12v
Date Posted: September 19, 2005 at 9:37 AM

check P M

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.