Remote Start for 2005 Toyota 4runner
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62957
Printed Date: May 14, 2024 at 5:27 PM
Topic: Remote Start for 2005 Toyota 4runner
Posted By: cashmoney
Subject: Remote Start for 2005 Toyota 4runner
Date Posted: September 20, 2005 at 9:06 AM
I have a 2005 4runner, I installed a viper x791 on it. Everything was successful except for when it comes down to the ignition immobilizer. The wiring diagram says the keysense wire is Grn/Yel and is located in the ignition harness. I haven't located those wires.The remote start works as long as the key is inserted the ignition. The only wires that I see going directly to the immobilizer are BLU, RD/GRN, GRN, PNK/BLU, GRY/RD and GRY/BLK. Also I am using the DEI 555X bypass module (so I don't lose a key) and it calls for a synch wire, clock wire and data wire. Does anyone have info on this or how to test which wires are which?
-------------
cashmoney
Replies:
Posted By: genehewett
Date Posted: September 24, 2005 at 1:06 AM
You have to use 555U, or 556U. The 555X works on 1999-2002 years. The DEI application list is here.
Posted By: cashmoney
Date Posted: September 26, 2005 at 8:07 AM
Thanks for the info, I ended up using the 556U. It also worked with gray valet key, so I didn't actually lose a key.
-------------
cashmoney
|