Valet 561T ch 2 output
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62989
Printed Date: September 17, 2025 at 4:56 AM
Topic: Valet 561T ch 2 output
Posted By: swamprat323
Subject: Valet 561T ch 2 output
Date Posted: September 20, 2005 at 7:29 PM
Does any one know if this unit has a trunk relaase output. on the box it comes in is says so. and in the manural in the quick refrence guide is mention, but in the main harness is says not used, and in the descriptions of the wires tere is nothign listed.
any one have a clue.
also in the program menu feature # 7,12,13,14 is says no function. i do see this a lot in program section in others manurals. is there somethign that can be change. why bother put it in the manural if tere is no function.
Replies:
Posted By: redpeppers
Date Posted: September 21, 2005 at 1:04 AM
there should be a RED / white that is 2nd channel output (200 ma negitive output)......is there a AUX on the key fab....
-------------
Where theres is a wire there's a way.
Posted By: swamprat323
Date Posted: September 21, 2005 at 7:39 PM
its is listed as only in the quick guide, but there was no RED / white wire in the harness. but it dotn say how it is used. i no longer have it so i cant play around with it to see how to use it.
|