Print Page | Close Window

2001 GRAND AM

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63030
Printed Date: May 14, 2024 at 3:02 AM


Topic: 2001 GRAND AM

Posted By: lilchepe
Subject: 2001 GRAND AM
Date Posted: September 21, 2005 at 3:43 PM

Hello buddies, well im here because i am in desperate help assistance.  i am workin on a remote start for a 2001 pontiac grand am. i pretty much completed the system.  now the problem is that when i test the alarm for the remote start the car turns on but immediately turns off again.  can someone give me a wiring diagram for the tach maybe thats the problem.  the tach i am using right now is a white wire located on the  electronic control module.  thank you for your time.   Jose.



Replies:

Posted By: mo12v
Date Posted: September 21, 2005 at 3:55 PM

Could be the PASS 2.................

Tach SignalPURPLE / WHITETOP OF ENGINE ON COIL


OR

White at ECM:
The ECM is located under the left side of the dash to the left of the column.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: mxxmikexx
Date Posted: September 21, 2005 at 4:05 PM
make sure you have the 2nd ignition wire powered up, its a dark green wire. also, is the car shutting down, or is the remote starting shutting down first? there is a difference.if its a pk2 problem your security light will be coming on the dash. i always use the PURPLE / white in the main harness going through the firewall (saves you the trouble of having to run a tach wire into the engine bay at all !)

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106




Posted By: kgerry
Date Posted: September 21, 2005 at 4:35 PM
what bypass module did you use?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: lilchepe
Date Posted: September 21, 2005 at 6:31 PM

Hey guys ,mo12v,mxxmikexx,kgerry thanks alot for the tips they are great helpful tips.  Now, i forgot to point out a few things.  k, i am using a 555L bypass module for the security so thats fine i was able to bypass the security of the car.  The first time i worked this car i did used the PURPLE / white wire for the tach (didnt work), then i used the white wire coming from the ecm and again freaking thing didnt work.  also i notice that the power,ignition, starter wires, i noticed that i have to take the radio of to reach to them. cant i just get them from underneath the dash by the ecm?. thanks guys . 

ohh mxxmikexx, the remote starting is succesfull , the car keeps shutting down as soon as it turns on. thanks guys .  if you would like to contact me, you can call me at (909) 992-8412





Posted By: mo12v
Date Posted: September 21, 2005 at 6:58 PM
Love those GM engineers...............
Some installers remove the Instrument Cluster..........

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: lilchepe
Date Posted: September 21, 2005 at 7:02 PM
do i really have to mo12v?




Posted By: mo12v
Date Posted: September 21, 2005 at 7:06 PM
I have done both.......thru Radio & Inst. Cluster.       I have no preference........It has to get done ....so either way

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: lilchepe
Date Posted: September 21, 2005 at 8:01 PM
Thanks alot mo12v for the tip ill give it another try something im doing is wrong.ohh forgot to point out that the engine is a 2.4L. thank you very much.




Posted By: gus1
Date Posted: September 21, 2005 at 9:15 PM
Pull the cluster... for the 6 screws it takes to do it (2 phillips on the bezel, 4 7mm on cluster itself, then pull radio trim, 2 10mm for key assembly) You can sit in the driver's seat, and comfortably wire everything aside from the brake wire and the doorlocks.

it can be done through radio opening, but I dunno about you, if your hands are the size of a 6yr olds or not, but I can't get mine in there and still be able to do something.

Gus


-------------
Wherever I go, that is where I end up......




Posted By: mo12v
Date Posted: September 21, 2005 at 9:25 PM

Not this again............AARRRGGGHHHHHHposted_image



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.





Print Page | Close Window