2002 Chevy Silverado door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63069
Printed Date: May 14, 2024 at 7:46 AM
Topic: 2002 Chevy Silverado door locks
Posted By: mrsparky637
Subject: 2002 Chevy Silverado door locks
Date Posted: September 22, 2005 at 10:01 AM
I am installing a Crimestopper CS-2016 system on my truck. The installation instructions say that one
wire puts out a (-)lock and (+)unlock pulse. The other wire puts out a (-) unlock and (+) lock pulse on the lock/unlock wires. How do I hook these wire up to work the door locks on my 2002 Silverado pickup? Will I need any additional equipment to do this (relays,diodes)??
I really appreciate any help.
Thanks
PS - You can go to www.crimestopper.com and view the installation manual for this product (CS-2016).
-------------
mrsparky637
Replies:
Posted By: mo12v
Date Posted: September 22, 2005 at 10:12 AM
CS suggest you use Diodes or Relays for Door Lock hook-up.
Some installers hook direct, but that is NOT a good practice. | Power Lock | L BLUE | AT B.C.M. BELOW THE STEERING COLUMN | | Power Unlock | WHITE | IN BROWN CONNECTOR |
Positive Pulse Door Locks ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mo12v
Date Posted: September 22, 2005 at 11:11 AM
HMMMM.......This seems to be DE'JA VOO............... https://www.the12volt.com/installbay/forum_posts.asp?tid=43690&KW=mrsparky637 ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mrsparky637
Date Posted: September 22, 2005 at 1:12 PM
I did ask before, but was for a different crimestopper product. I also, wanted to make sure I gave as much information as I could. What type of diodes will I need
and how will I need to install them? As you can tell I am not a professional installer, but I do know my limitations. I just want the thing to work and not mess up my truck.
Thanks for your help
-------------
mrsparky637
Posted By: mrsparky637
Date Posted: September 22, 2005 at 1:14 PM
If I need to use relays will I be changing the polarity or what? I am confused by cs listing - and + on each wire.
Thanks again
-------------
mrsparky637
Posted By: mo12v
Date Posted: September 22, 2005 at 5:42 PM
Some Units automatically switch Door Lock Voltage.
Some Units have to be Programmed.
Your Installation Manual should have that.
I believe that the CS-2016 does NOT need to be programmed.
U will need 2 Diodes for connections
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mrsparky637
Date Posted: September 22, 2005 at 9:43 PM
OK, I appreciate the help!!!
-------------
mrsparky637
Posted By: amador
Date Posted: September 22, 2005 at 11:52 PM
the crimestopper alarm willgive you a neg and a pos trigger the chevy uses a pos trigger you dont need any relays all you would have to do is revers the wires on the alarm hook the lock form the alarm to the unlock on the truck hook the unlock to thelock wire on the truck thats it sounds wiered but its true
|