369D on 1995 Grand Am

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63118
Printed Date: May 10, 2025 at 4:31 AM

Topic: 369D on 1995 Grand Am

Posted By: Burner_00
Subject: 369D on 1995 Grand Am
Date Posted: September 22, 2005 at 10:12 PM

Ok all, here is the deal I have a 369D that i want to install on a 1995 Grand Am. can anyone give me a heads up on what to excpect? do i have to by pass Passlock? is the following wiring correct?
https://www.the12volt.com/wireinfo/volt.asp?Year=1993&Make=Pontiac&Model=Grand%20Am&Table=Security
anyone have tips or points on where this all gets connect? mainly under the dash or alot in engine compartment?
and how difficult is it to interface with the door locks?

Thank you!

Replies:

Posted By: genehewett
Date Posted: September 23, 2005 at 11:25 PM

This should get you what you need along with a DVOM. The door locks are positive pulse "one of the easiest there is". Links 1and 2 are vehic. wire info and 3 is positive pulse locks info. You do not need a immobiliser bypass.

link 1 link 2 link 3

Print Page | Close Window