Print Page | Close Window

keyless entry, 97 fford explorer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63206
Printed Date: July 21, 2025 at 5:40 PM


Topic: keyless entry, 97 fford explorer

Posted By: lewlew420
Subject: keyless entry, 97 fford explorer
Date Posted: September 24, 2005 at 3:09 PM

i have a 97 fford explorer that the driver door will not open with the key. i purchased a valet 712t KE system to handle this problem. Now i am sure if i have 3 or 5 wire locks. i tried installing it with 2 relays as a 5 wire but never could get it to work. anyone hav any input here for me please

frustrated

lew



Replies:

Posted By: mo12v
Date Posted: September 24, 2005 at 3:47 PM

Doesn't take long to remove door panel & look at Door Lock

If it is FACTORY Door Locks:

Power LockPINK / YELLOW  ( - )DRIVER KICK
Power UnlockPINK/L GREEN  ( - )PANEL
Negative Pulse Door Locks



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: lewlew420
Date Posted: September 24, 2005 at 11:55 PM
i guess i meant to ask about the relay situation. Do i even need to wire 2 relays in this system or not? and if i do, 3 wire or 5 wire? I am not very sure which application to use

lew




Posted By: mo12v
Date Posted: September 25, 2005 at 8:37 AM

Some installer direct wire the wires from your 712t KE  to Factory wires.

I use .....2 SPDT Relays:

Relay 1

LOCK:
PIN 87 = PINK / Yellow Lock wire
PIN 87a = XX
PIN 30 = GROUND
PIN 85 = Negative Lock Output from 712t KE
PIN 86 = Constant 12 volt ( + )

Relay 2

UNLOCK:
PIN 87 = PINK / L.Green
PIN 87a = XX
PIN 30 = GROUND
PIN 85 = Negative UNLock Output from 712t KE
PIN 86 = Constant 12 volt ( + )



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: lewlew420
Date Posted: September 25, 2005 at 10:23 PM
so in my case i wouldnt use this set up: 3 wire negative??

https://www.the12volt.com/doorlocks/page3.asp#3wp

and do what it says for negative





Print Page | Close Window