Print Page | Close Window

Black widow 9900 Wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63328
Printed Date: May 07, 2024 at 10:52 AM


Topic: Black widow 9900 Wiring

Posted By: wildfire_au
Subject: Black widow 9900 Wiring
Date Posted: September 26, 2005 at 8:28 PM

Hi all new to the forum, but is looks like the most comprehensive help forum on the net that I have found about car alarms. Anyways I just bought a black widow 9900 alarm on the weekend. and I’m going to go about installing the alarm this weekend now most of the included instructions are quite clear but very brief, my problem is I’m not a fan of relays and within the kit I can find a place for everything there apart from the relay provided where does it go ?? I have no idea and there is no reference to it anywhere in the manual. So I’ll rattle off what I plan to hook up as far as the rest goes but that relay has me stumped. Any help would be greatly appreciated thanks

7 pin connector

  • white ---- indictor
  • white ---- indictor
  • brown ---- siren
  • brown \black ----siren
  • green --- door switches

5 pin connector

  • red --- 12v+
  • black --- ground
  • yellow --- accessories
  • Grey ---???? don't think I need this one
  • Orange---??? don't think I need this one

3 pin door lock pulse

  • green --- negative door pulse
  • (blank but option for red)
  • blue --- negative door pulse

The other plugs in the unit only fit in one place (valet switch, led, shock sensor)

Then the relay that I have no idea about is it something for the door locks? The relay is the same as the first one here

posted_image

thanks for any help




Replies:

Posted By: wildfire_au
Date Posted: September 26, 2005 at 8:32 PM

Sorry i had no idea that word would do that so i'll try again

Hi all new to the forum, but is looks like the most comprehensive help forum on the net that I have found about car alarms. Anyways I just bought a black widow 9900 alarm on the weekend. and I’m going to go about installing the alarm this weekend now most of the included instructions are quite clear but very brief, my problem is I’m not a fan of relays and within the kit I can find a place for everything there apart from the relay provided where does it go ?? I have no idea and there is no reference to it anywhere in the manual. So I’ll rattle off what I plan to hook up as far as the rest goes but that relay has me stumped. Any help would be greatly appreciated thanks

7 pin connector

  •  white ---- indictor
  •  white ---- indictor
  •  brown ---- siren
  • brown \black ----siren
  • green --- door switches

5 pin connector

  •  red --- 12v+
  • black --- ground
  • yellow --- accessories
  • Grey ---???? don't think I need this one
  •  Orange---??? don't think I need this one

3 pin door lock pulse

  • green --- negative door pulse
  • (blank but option for red)
  • blue --- negative door pulse

The other plugs in the unit only fit in one place (valet switch, led, shock sensor)
Then the relay that I have no idea about is it something for the door locks? The relay is the same as the first one here

posted_image




Posted By: mo12v
Date Posted: September 26, 2005 at 8:39 PM
Not knowing what Year , Make, & Model Vehicle this is going into, I would bet if you read the Manual the ......Orange---??? don't think I need this one wire goes to the Realy for Starter KILL


-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: wildfire_au
Date Posted: September 26, 2005 at 8:54 PM
sorry it is going into a 1997 hyundai lantra, and that is why i'm asking questions i've only done a couple of cheap ass alarms before which didn't anywhere near the amount of features that this one does...


Print Page | Close Window