2003 Jeep Power Door Lock Contacts

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63342
Printed Date: May 08, 2024 at 5:15 AM

Topic: 2003 Jeep Power Door Lock Contacts

Posted By: jhgraham
Subject: 2003 Jeep Power Door Lock Contacts
Date Posted: September 27, 2005 at 6:36 AM

As requested. Jeep Power Door Lock Pin Contacts. Size 1.5 X 3/8 x .7 inch. I just found time to upload this picture. Made specificaly for Jeeps due to space restrictions. More on my site about them in the Jeep page.

https://mysite.verizon.net/vze6seqk/

posted_image

-------------
Knowledge is Indisputable, Opinions are Subjective.

Replies:

Posted By: Velocity Motors
Date Posted: September 27, 2005 at 8:43 AM

Great information jhgraham.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Fullthrottle
Date Posted: September 27, 2005 at 2:57 PM

Sweet!

Who did you get to do the injection molding for you?

Posted By: jhgraham
Date Posted: September 27, 2005 at 3:36 PM

My surrogate son Eric who is a Model Maker for a medical firm made the parts. The parts are made from bar stock, Delrin AF, and not injection molded. Any quantity should be injection molded to reduce cost.

The parts can be mass-produced and sold if someone wishes to do so, you have my blessings.

I have passed on the drawings to Jeep for future consideration.

-------------
Knowledge is Indisputable, Opinions are Subjective.

Posted By: jhgraham
Date Posted: October 04, 2005 at 2:43 PM

CAUTION!!
I have posted additional pictures of the installation on my web site in the Jeep page. https://mysite.verizon.net/vze6seqk/.

Those who are thinking of implementing door locks should be very careful and not stray from my design guide located on my web. You risk drilling into the window jam and cause major problems if the dimensions are not followed.

The installation was very easy and took about one hour per door. This is with rechecking everything twice before cutting.

-------------
Knowledge is Indisputable, Opinions are Subjective.

Posted By: ituneyou
Date Posted: October 06, 2005 at 12:45 AM

https://www.dlcparts.com/frontend/p_disp.asp?Category_No=10000147

check out the van sliding door switches

-------------
A man has got to know his limitations

Posted By: mo12v
Date Posted: October 06, 2005 at 9:08 AM

I use Van Sliding Door switches also............work good & have rubber boots

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: jhgraham
Date Posted: October 06, 2005 at 9:42 AM

The sliding door switches have a length of 2.5 inches and a width of 1.25 inches. I would be interested in seeing a picture of the installation on a 2003 Wrangler.

This is the space you have to work with. As I see it the maximum width is .38 inch for the switch and must be mounted as shown.

posted_image

-------------
Knowledge is Indisputable, Opinions are Subjective.