Alarm/ remote start Disarm?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63401
Printed Date: June 10, 2024 at 7:37 AM
Topic: Alarm/ remote start Disarm?
Posted By: jshgrad1
Subject: Alarm/ remote start Disarm?
Date Posted: September 28, 2005 at 5:29 AM
I am going to install a Viper 300 esp and a DEI stand alone remote start together in my 05 cobalt. Does the remote start have to Disarm the alarm? If so, I didnt notice any - alarm disarm inputs on the 300 esp. And am I right that I dont need the install a starter kill relay on the alarm side because of the Passlock2? Help appreciated, Thanks, Josh
Replies:
Posted By: mo12v
Date Posted: September 28, 2005 at 11:59 AM
I use the OMEGA #IB-PLXR ByPASS..........
Ignition ON with ByPASS ON will Dis-Arm
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: redpeppers
Date Posted: September 28, 2005 at 5:04 PM
yeah no start kill is needed on that car....and on the remote start the starter wires (purple and green) is not needed either. U will have to wire a relay on the igntion input wire on the alarm off the blue status of the remote start to disconnect power on that wire or the alarm will sound.....also if the alarm has a external shock sensor then u will also have to wire a relay to disconnect power to it during remote start.
-------------
Where theres is a wire there's a way.
Posted By: jshgrad1
Date Posted: September 28, 2005 at 8:27 PM
Thanks, Im just going to have the wife disarm the alarm before starting, thanks!
|