factory alarm, 92 Buick Park Avenue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63449
Printed Date: May 13, 2025 at 6:42 PM
Topic: factory alarm, 92 Buick Park Avenue
Posted By: muaiad97
Subject: factory alarm, 92 Buick Park Avenue
Date Posted: September 28, 2005 at 8:38 PM
hi all anyone can tell me how to disconnect thr factory alarm on buick park avenue 1992 i want to install new alarm . becaus of the factory alarm is on the car is not starting with the key on run but ther is no start so i thaut my be its the factory disarm wire. thanx
Replies:
Posted By: mo12v
Date Posted: September 28, 2005 at 8:53 PM
| OEM Alarm Disarm | LIGHT GREEN | (-) AT EITHER KICK PANEL |
| RKE Module | BEHIND RIGHT SIDE OF DASH ABOVE GLOVE BOX |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: fingaz22
Date Posted: September 28, 2005 at 9:35 PM
your car has a resistor in the key right? if so you will not be able to bypass because it is tied right into the power train module (computer) only if you have the pellet in the key. if this is the case then you will need to replace then ignition switch key cylinder. they get worn out in side and lose contact with the pellet. i've had to do three this month alone. if you have anyother question pm me
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
Posted By: muaiad97
Date Posted: September 28, 2005 at 9:44 PM
thanx for replay yea the key still the original one and ther is resistor in the key
Posted By: fingaz22
Date Posted: September 28, 2005 at 9:51 PM
you can get the cylinder at a local lock smith. when you install it you will have to cut the wire at the junction block near where your feet rest above the brake pedal. just make sure you soldier you connection. it dont matter what way the two wires go seeing that it is a resistor.(no polarity). lol
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
|