Remote start activation!
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63451
Printed Date: May 13, 2025 at 3:43 PM
Topic: Remote start activation!
Posted By: jshgrad1
Subject: Remote start activation!
Date Posted: September 28, 2005 at 9:02 PM
Can i tell my alarms 3rd cahnel - to the DEI WHITE/ Blue - Activation to start the vehicle? Kinda old at this! Thanks
Replies:
Posted By: fingaz22
Date Posted: September 28, 2005 at 9:27 PM
what polarity pluse comes out of your third channel? and what polarity does the dei need to see? a relay could help if they are diffrent.
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
Posted By: redpeppers
Date Posted: September 28, 2005 at 11:43 PM
the WHITE/ blue is a negitive trigger and almost all alarms extra channels a negitive outputs....so use it will work.....unless the output off the 3rd channel is postive....which i doubt
-------------
Where theres is a wire there's a way.
Posted By: kgerry
Date Posted: September 29, 2005 at 10:12 AM
many DEI units now have a WHITE/ red + activation input as well.......
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: jshgrad1
Date Posted: September 29, 2005 at 1:21 PM
The whte/blue worked fine, I just had to turn the senistivty down on the shock sensor and she starts and alarm works fine! That car definately starts funny, i cant beleive by just showing the Resistor it starts. Went like a charm, Thanks to all who helped
|