Print Page | Close Window

Viper Alarm and Valet remote?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63468
Printed Date: May 09, 2025 at 8:48 AM


Topic: Viper Alarm and Valet remote?

Posted By: duley3
Subject: Viper Alarm and Valet remote?
Date Posted: September 29, 2005 at 6:39 AM

I have a viper alarm system (made before 1998) not sure of model. And I also have a Valet 562T remote starter for a different car. What I would like to know is there any way to make the Valet remote work for the older Viper unit? I have two remote for the Valet, none for the Viper unit.

Thanks

Dave




Replies:

Posted By: deepinit
Date Posted: September 29, 2005 at 7:31 AM
Not the same exact thing but I have a DEI Sidewinder 7000HF and a Code Alarm CSI400.  I was told since they are both stand alone units, they would NOT be able to work with one remote so I said "screw U" and tried it anyway (hate it when people tell me I can't do stuff).  So what I found out was that the DEI is at freq 434 while the code alarm was at 433.  The Code Alarm was not able to learn the DEI remote HOWEVER the DEI was able to learn the Code Alarm remote.  So now I use the Code Alarm remote to run both DEI and Code Alarm  units.  Still have yet to go back to the store and show off at "what could not be done".


Print Page | Close Window