Print Page | Close Window

ca-425 lock an unlock in honda pilot?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63651
Printed Date: May 15, 2025 at 5:30 PM


Topic: ca-425 lock an unlock in honda pilot?

Posted By: sparkymz
Subject: ca-425 lock an unlock in honda pilot?
Date Posted: October 02, 2005 at 3:39 PM

Any one hookup the lock unlock feature in a honda pilot?

Do I need extra relays, if so where do they go? do I have to cut the wires at the switch or can everything be done from the pas kick panel?

Thanks,




Replies:

Posted By: mo12v
Date Posted: October 02, 2005 at 6:20 PM
What YEAR???????????

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: sparkymz
Date Posted: October 02, 2005 at 7:07 PM
2003



Posted By: mo12v
Date Posted: October 02, 2005 at 7:09 PM

Power LockBLACK/ ORANGEPASSENGER'S UNDER-DASH
Power UnlockBLUE/ORANGEFUSE RELAY BOX AT 20 GREEN PIN CON.
Negative Pulse Door Locks

or

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=5229&product=Remote%20Start



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: sparkymz
Date Posted: October 02, 2005 at 7:18 PM

so i can just hook right up to these wires with the neg pulse without an external relay?

thanks




Posted By: sparkymz
Date Posted: October 02, 2005 at 7:36 PM
thanks!



Posted By: mo12v
Date Posted: October 02, 2005 at 7:37 PM
Some Installers DO..........
If you DO NOT have Internal Relays in your ca-425 for Door Locks then it is recommended  using 2 Relays.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: sparkymz
Date Posted: October 02, 2005 at 7:57 PM

meterd out the cylinder wires and your right they are a neg pulse.

hooked up the wires direct and seems to work excellent for now.

thanks!


Print Page | Close Window