Rattler remote start problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63678
Printed Date: May 15, 2025 at 8:26 AM
Topic: Rattler remote start problems
Posted By: 92rustang
Subject: Rattler remote start problems
Date Posted: October 02, 2005 at 9:53 PM
I have got everything working, but the starter does not disengage after 15 seconds. I checked the programming and it all seems right. It is set for tach checking and crank time is .06 sec. Any other ideas? Thanks for the help this looks like a forum I will use allot.
Replies:
Posted By: JWorm
Date Posted: October 03, 2005 at 12:21 AM
What wire did you use for tach?
Did you program tach?
We're all gonna assume you have a 92 Mustang....
Posted By: 92rustang
Date Posted: October 03, 2005 at 4:36 PM
I tried two wires off of the tach. The first was Blue and the second was Red?. Starter does the same thing connected to both. I did read somewhere about programming the Tach but do not remember where. I thought that the engine would not start if the tach needed to be programmed? If you have any info on programming it I will give it a shoot. Thanks again for the help. Yes a do have a 92 Mustang how do you ever guess.
|