Installing a Clifford 10.5X on ’93 Taurus
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63704
Printed Date: May 01, 2024 at 5:22 PM
Topic: Installing a Clifford 10.5X on ’93 Taurus
Posted By: shocontinental
Subject: Installing a Clifford 10.5X on ’93 Taurus
Date Posted: October 03, 2005 at 9:33 AM
I have a '93 Taurus SHO that I want to put my clifford Matrix 10.5X "responder" alarm on, This car has been brocken into, and cars have been stolen off my street. My other SHO has an alarm but this one doesn't so far. I bought the alarm on saturday and attempted intstall, I didn't cut into any wires or do anything once I realized the amount of connections I'd need to make, now I'm cut between just getting it installed professionally and looking up wiring diagrams to find out where to run and splice in all these wires.. The car has remote keyless already, and it has driver door unlock then all door unlock, and trunk release, My remote keyless box is mounted in the trunk.. Any info, help, wireing diagrams, or anything related to the clifford Matrix 10.5X would be appreciated..
Replies:
Posted By: redpeppers
Date Posted: October 03, 2005 at 3:02 PM
that car isnt be very hard.....do u know how to wire a relay? also what about 5wire relay wiring.....if not.....u may have a hard time on the trunk relase and the lock and unlock
-------------
Where theres is a wire there's a way.
|