windows stop half way,530T?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63966
Printed Date: May 15, 2024 at 1:34 AM
Topic: windows stop half way,530T?
Posted By: nava94
Subject: windows stop half way,530T?
Date Posted: October 06, 2005 at 10:24 PM
2005 Chevy Avalanche 2 front windows once in a while get stuck half way. tryed low/middle/high setting for resistance. once in a while passenger window stops half way. Has anyone encountered this on this truck? Has anyone changed the internal resistor on the board to resolve this problem? Which resistors have to be changed on the board?I went into each door for the motor/switch, up & down. proper 12volts & ground supplied to the 530T's.
Replies:
Posted By: carguy411
Date Posted: October 06, 2005 at 11:16 PM
if u put it to the highest settingthe only thing i can think of is that maybe there isnt enough juice getting to thru the module to the window motors
i could be wrong anyone else wanna chime in
Posted By: blazeronspokes
Date Posted: October 07, 2005 at 9:33 AM
i had a similar prblem on my 87 Blazer. i uped the power wire gauge and it solved the problem. just run a nice 10g or 8g wire and you should be all set.
|