Print Page | Close Window

lose central locking when i wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64076
Printed Date: July 15, 2025 at 10:26 AM


Topic: lose central locking when i wire

Posted By: ozgeorge
Subject: lose central locking when i wire
Date Posted: October 09, 2005 at 7:56 AM

in the wires for flashing the indicators..

does anyone know what might be causing this? the unit triggers my central locking fine but as soon as i wire in the wires to the indicators it stops triggering the locks (but flashes the indicators!)

this sucks. any suggestions?

ozgeorge




Replies:

Posted By: Evolution-UK
Date Posted: October 09, 2005 at 10:16 AM
make - model - year might help



Posted By: ozgeorge
Date Posted: October 10, 2005 at 2:24 AM
its a dynamco p355 (s35i) brand new. into an old bmw.




Print Page | Close Window