Print Page | Close Window

clifford 3.5 remotestart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64199
Printed Date: May 04, 2024 at 11:55 PM


Topic: clifford 3.5 remotestart

Posted By: accord78
Subject: clifford 3.5 remotestart
Date Posted: October 11, 2005 at 6:10 PM

here's a question i wanted to know if u can make clifford 3.5 chirp when u remote start it. like some alarms they chirp first then start the car and then turn lights on . is there a way to do this



Replies:

Posted By: Teamrf
Date Posted: October 11, 2005 at 6:37 PM
You can set a relay to do this..

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.




Posted By: accord78
Date Posted: October 12, 2005 at 8:17 PM
how would i go on doing this????




Posted By: redpeppers
Date Posted: October 13, 2005 at 12:20 AM
try this.....85 (factory disarm wire off brain), 86 (12v constant), 30 (brown wire going to siren), 87 (12v+ constant), 87a (brown wire going to brain)  I have never tried this ....but this is one way to can try it.....also let me know how it works out...i would like to know myself 

-------------
Where theres is a wire there's a way.




Posted By: cntrylvr79
Date Posted: October 13, 2005 at 4:41 PM
Have done this in the past to a few customers cars.  It does work very well.  The chirp is a little long but hey it does work though.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer





Print Page | Close Window