Print Page | Close Window

ford factory code systems in escape

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64233
Printed Date: July 07, 2025 at 10:31 PM


Topic: ford factory code systems in escape

Posted By: Hymer
Subject: ford factory code systems in escape
Date Posted: October 12, 2005 at 10:56 AM

Anybody have any info on this rs? I have one in the shop and it is a mess... no RS and nothing soldered.. Loking for a manual or operation ect.. also there is a white wire that is not connected on a three wire harness (next to the main RS harness..) anyone??

Thanks

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair



Replies:

Posted By: brison
Date Posted: October 12, 2005 at 5:07 PM

I used to install for ford dealer company  I might be able to help with some info




Posted By: NowYaKnow
Date Posted: October 12, 2005 at 6:59 PM
Anybody have any info on this rs? I have one in the shop and it is a mess... no RS and nothing soldered.. Loking for a manual or operation ect..

What exactly does it do when you try to remote start it? Wire diagram is on the back of the module. Probably something simple not wiring related.

"also there is a white wire that is not connected on a three wire harness"

Not needed don't worry about it.




Print Page | Close Window