Tilt sensor diode

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64237
Printed Date: June 09, 2024 at 5:09 AM

Topic: Tilt sensor diode

Posted By: jonchos
Subject: Tilt sensor diode
Date Posted: October 12, 2005 at 11:57 AM

I have a 507T sensor and I need to install it in my matrix 1 alarm. I know I have to plug the (+) and the (-) and the trigger to the primary trigger of my alarm. How do i hook up the diode on the trigger wire? wich way? and what diode? I dont really know much about diodes. Please help.

Replies:

Posted By: jonchos
Date Posted: October 12, 2005 at 2:04 PM

I know but what about if I use a diode that is 1N4001-Micromini?

Ratings

Peak increase voltage PIV 50V

Forward voltage drop(VF) at If 1.6V

Forward current (If) 1A

Max. surge current (16ms) 30A

Reverse current at PIV 10uA

would this one work? or do i need somethin else? like a 1N4001/L?

Posted By: jonchos
Date Posted: October 12, 2005 at 2:13 PM

ok thank you for all of your help

Print Page | Close Window