556T and 2WSS-AS
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64342
Printed Date: June 19, 2025 at 7:00 AM
Topic: 556T and 2WSS-AS
Posted By: ThurzNite
Subject: 556T and 2WSS-AS
Date Posted: October 14, 2005 at 12:36 AM
I have a 2004 model 2WSS-AS without the temp module. If I were to add a DEI 556T, where would I attach the (-)Trigger Output to the 2WSS-AS?
Thank you
Jae
Replies:
Posted By: ThurzNite
Date Posted: October 14, 2005 at 12:36 AM
BTW, here is the install manual for the 556T
https://www.directechs.com/guides/manuals/ig/valet/N556T.pdf
Thanks again.
Jae
Posted By: Velocity Motors
Date Posted: October 14, 2005 at 9:41 AM
From what I can see there is a CN10 harness but the Compustar unit has a 3 pin connection and the DEI peice has 4. The (+) & (-) is basic, but not sure if the Compustar's input trigger is a (-) or (+) ? You will need to test this out by applying a (-) trigger first to the middle pin and see if this starts the vehicle. DO THIS AT YOUR OWN RISK, not responsible for anything that burns up or starts smoking, just telling you what I think is right. I have the temp sensor's for the Compustar for sale if you want ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|