hi ... i install a 2 way security and remote starter system on my ford mustang 2000 3.8L MANUAL
i have 4 question ,first i have the automatic central lock - unlock with my 2 way system ,when i push the brake all is ok the door lock ,but when i stop the engine it's suppose to unlock but nothing happen ?
second ? i can only start the engine when is armed ?
third ?i have window roll-up with my system how can i do that?
fourth?i have white key on signal positive input how can i do that ?
tank's for helping me and sorry for my english i speak french:oops:
edith] wrote:
P>hi ... i install a 2 way security and remote starter system on my ford mustang 2000 3.8L MANUAL i have 4 question ,first i have the automatic central lock - unlock with my 2 way system ,when i push the brake all is ok the door lock ,but when i stop the engine it's suppose to unlock but nothing happen ?
second ? i can only start the engine when is armed ?
third ?i have window roll-up with my system how can i do that?
fourth?i have white key on signal positive input how can i do that ?
tank's for helping me and sorry for my english i speak french
no body can help me ?
hi again i buy this remote starter
THOR 2-WAY LCD CAR ALARM SYSTEM w/2 TRSMTRS !
all work ok except i tmade a test for security ,when i start the engine with the remote ,i put the car in 1 gear with the e-brake and i push the clutch and the car start ,what i have to do if i dont whant the car to start when is in gear ?,i whant a protection for my kids ,i only whant the car start when is in neutal and with the e-brake tank's for the help
edith] wrote:
,i whant a protection for my kids ,i only whant the car start when is in neutal and with the e-brake tank's for the help
Don't Install it ? ! ? !
I don't................
You need a Clutch Relay or there are a few companies that make a NEUTRAL SAFETY ByPASS like
Peripheral .. # NSS ..... R / S must have Stop & Go or Pit Stop
DEI makes one also.........
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
mo12v
in my user manual it's mark it's start with the remote only in neutral gear and with the e-brake ?
is that possible it's the clutch bypass my problem? tank's
bobk]T wrote:
e unit sounds like it is for a automatic and not for a standard trans, if so then Mo is right , don't install it. You have no way of telling the unit that you are in netural and is is a parking brake not a emergancy brake. With that said there is no way to guarranty that you or anybody else will use the parking brake and the car will start and kill someone or do serious dammage.
hi...that's my 2 way remote starter and it's for automatic and manual.
https://cgi.ebay.ca/dll?ViewItem&category=94832&item=5810182258
bobk]I wrote:
netural and p-brake are the only safety's then ti is not for a manual trans. At best it can be a killer car.
are you sure i have only that ?
what the clutch bypass do ? is it that for the security of manual car?
6. Will remote engine start feature work on manual or automatic transmission ?
A: This feature will work on both manual and automatic. NOTE that for manual transmission your car must be in neutral gear and hand brake must be applied before you can remote start it. When installing for the manual transmission you will have to BYPASS the clutch.
bobk]I wrote:
netural and p-brake are the only safety's then ti is not for a manual trans. At best it can be a killer car.
what can i do if i whant it secure or what can i buy ? tank's