Viper 125 HF (blink!blink!)

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6456
Printed Date: July 03, 2025 at 12:02 AM

Topic: Viper 125 HF (blink!blink!)

Posted By: Wonton
Subject: Viper 125 HF (blink!blink!)
Date Posted: December 09, 2002 at 11:33 PM

Hello, having problems with my remote starter/keyless entry. Everything is working, but my parking lites blink inside(dash) and outside (parking lites), throughout the remote start sequence about 12min. When I put in my key and press the brake they return to normal. The manual sayes that flashing is the default setting. Any idea how to change factory defaults on a viper? This problem started after hooking up lock/unlock relays both triggered on negative.

97 Plymouth Voyager

Thanks for any help.

-------------
--

Replies:

Posted By: cpgoose
Date Posted: December 10, 2002 at 2:17 PM

I take it you don't have the manual for the alarm? Well, I couldn't find the viper 125hf on DEI's website, but this is how you do it on the 550esp. On page 37, it tells you how to program the alarm so you can make the lights stay constant while the car is remotely running. It's the third menu in the manual.....but again, this is for the 550esp....maybe someone has the manual for the 125hf.

Print Page | Close Window