05 Jeep Liberty transponder

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64630
Printed Date: May 16, 2025 at 10:43 PM

Topic: 05 Jeep Liberty transponder

Posted By: iskidoo
Subject: 05 Jeep Liberty transponder
Date Posted: October 18, 2005 at 11:40 PM

Has anyone used the trilogix CHDL6-PK2 yet and have they had any issues with it? It looks to be a decent all around unit for bypass, security and locks but still uses the induction loop and I worry about placement issues when the weather gets cold. https://bypasskit.com/product.aspx?prodid=CHDL6-PK2&catid=17

Or do you guys prefer the 556CW for bypass.

-------------
Steve G

Replies:

Posted By: redpeppers
Date Posted: October 18, 2005 at 11:44 PM

i like the directed systems................

-------------
Where theres is a wire there's a way.

Posted By: Velocity Motors
Date Posted: October 19, 2005 at 9:16 AM

I have used these and have had no problems with it at all. I've used 2 since they came out and both are still functioning perfectly fine. What I usually do is dab some hot glue on the ignition cylinder where the loop goes to help it stay in place.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: iskidoo
Date Posted: October 19, 2005 at 1:57 PM

Awesome Jeff thanks for the review and the good tip with the glue.

-------------
Steve G

Print Page | Close Window