ZX central locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64652
Printed Date: July 17, 2025 at 11:51 PM

Topic: ZX central locking

Posted By: widget
Subject: ZX central locking
Date Posted: October 19, 2005 at 10:01 AM

I have fitted a new alarm to my ZX 14i

and it also as the central locking on the alarm and i want to use it .On the alarm loom there is 6 wires but am i right in thinking that only the trigger wires need to be fitted to the device under the centre hanbrake console , And if i fit it will i need to do something like disable the original central locking

Replies:

Posted By: widget
Date Posted: October 19, 2005 at 4:39 PM

AOLIN 838 central locking and auto start

Posted By: widget
Date Posted: October 19, 2005 at 4:54 PM

It as 6 whiers coming out of the alarm for the locking ora / whi / yell/ and the same with a black stripe yellow and yellow black go to earth both oranges have a scissor mark so i prosume dont need them so that leaves the white wires signal on and signal off oh now i have wrote it down it makes sence . But just one thing do i put them to the drivers door motor or the unit in the console

Posted By: widget
Date Posted: October 20, 2005 at 4:48 AM

Can some one please tell me which is the sensor wires on the control unit ora/blue and orange or green /blue . green white

Print Page | Close Window