2005 Hyundai factory doorlock disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64659
Printed Date: May 16, 2025 at 7:29 PM

Topic: 2005 Hyundai factory doorlock disarm

Posted By: tooler
Subject: 2005 Hyundai factory doorlock disarm
Date Posted: October 19, 2005 at 1:37 PM

Does anyone know what wire to hook into to disarm factory doorlock alarm when unlocking?

Replies:

Posted By: infinkc
Date Posted: October 19, 2005 at 2:37 PM

model?

Posted By: tooler
Date Posted: October 20, 2005 at 6:12 AM

Sorry. It is an Elantra

Posted By: mo12v
Date Posted: October 20, 2005 at 8:08 AM

Disarms with factory remote only
OR

it should Disarm with ign, acc, and key sense Powered Up

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Chris Luongo
Date Posted: October 22, 2005 at 7:07 AM

The factory alarm will still disarm with ignition and the first accessory wire powered up (the one that powers the climate controls).

The wire that powers up the radio; that's up to you. I leave it unpowered so the radio stays off, but it won't hurt if you power it up.

If you trigger the keysense wire, the factory remotes will not work with the engine running.

Unfortunately, the best solution is this: Install the remote start, leaving the keysense wire alone. Carry the factory remote to control the locks and trunk.

Print Page | Close Window